Avenger 3 Pro Nickel

Avenger 3 Pro is specifically engineered to work seamlessly with standard needles and cartridges of any size, offering exceptional versatility for various tattoo styles. Whether it's intricate works with 3RL needles, or larger, solid black designs requiring 49 Mags, this machine lets you experiment effortlessly.

Avenger 3 Pro is powered by our cutting-edge brushless M3Pro motor (12.6 Watt) with an additional heavyweight flywheel, which is always fueled with a 12-volt punch. The speed is adjusted not with voltage, but by toggling the motor windings. This lets you unleash truly mind-blowing power and colossal torque, even at low speeds (starting from 30 Hz).

The machine comes with a common high-quality Panasonic 18500 battery (2040mAh). The battery life largely depends on your speed and stroke settings. For instance, using a mode often employed for lines and packing — 4.2-millimeter stroke at 85Hz — can provide up to 7 hours of work time. In case your session runs longer than expected, worry not — just a 15-minute charge replenishes approximately 1.5 hours of operation. Additionally, the option of swapping the battery for a spare one in a matter of seconds ensures uninterrupted sessions.

Estimated capacity loss (not guaranteed) under proper usage conditions is less than 15% over 2 years of use. This means noticeable loss should not occur before 2-3 years. After this period, you can easily purchase a replacement battery - readily available on any major marketplace.

To prolong the battery life, avoid storing the machine at temperatures exceeding 45°C (113℉) and with a fully discharged battery.

Unfortunately, we won't be able to send you the battery separately from the machine due to existing customs restrictions in most countries worldwide regarding the shipment of batteries.

We suggest purchasing PANASONIC batteries, specifically the NCR18500A model. While Li-Ion 18500 batteries from other manufacturers are also compatible, ensure they are of the unprotected type (without built-in protection).

Based on our experience, purchasing these batteries is easiest through Amazon.

Avenger 3 Pro is exceptionally versatile, catering to all imaginable tattoo styles and techniques. Its powerful motor, adjustable stroke, and compatibility with both standard needles and cartridges make it an ideal choice for artists seeking adaptability and experimentation.

Check the Avenger 3 Pro page for our recommendations on the modes used in most popular styles: https://avenger3pro.vladblad.com/

While Avenger 3 Pro was created with professionals in mind, its user-friendly design makes it perfect for beginners as well. The versatility it brings allows anyone to explore and master any technique. And of course being wireless, it eliminates the need to purchase cords and power supplies, simplifying the setup process for newcomers.

"Measuring speed with voltage isn’t practical for rotary machines. Voltage is influenced by the motor type, which can vary significantly. Even two identical machines may perform differently on the same voltage due to varied power supplies or wires.

That's why we shifted from measuring voltage to frequency. Frequency is an absolute value and a potential future industry standard.

To assist in understanding frequency, we've provided a rough comparison between volts used with Avenger 2 Pro and hertz on Avenger 3 Pro on this info page: https://avenger3pro.vladblad.com/

We provide a one-year warranty for all components of the machine.*(The warranty applies to the battery only in case of loss of battery capacity by more than 20% for 1 year of use.)

This machine has been built to show the manufacturer if it has been self-repaired or modified in any way. In this case the warranty will be void.

If you purchased the machine from our distributors, please provide the receipt or the warranty card in any form to get the warranty service.

In case of any trouble feel free to contact us via Instagram - @vbi_support or via e-mail - [email protected]. We will be happy to answer your questions!

*Warranty does not cover:

• Damage due to impact, thermal treatment of the body part with the motor and mechanisms, immersion, and treatment with liquids resulting in corrosion of external and internal elements, color changes.
• Coating chips around the grip lock or thread.
• Self-repairs and modifications.

The first batch (of 80 machines) has slightly sharper edges. This does not affect the performance in any way; the changes were purely aesthetic.

Alongside the transition to a wireless, changeable battery, the new generation Avenger introduces significant enhancements.

Featuring a more potent brushless motor, equipped with an additional heavyweight flywheel (12.6W vs. 10.5W), in synergy with our innovative DirectPower supply system, Avenger 3 Pro stands as the pinnacle of advanced solutions available in the market.

Addressing your feedback about rubber bands tearing on Avenger 2 Pro, we've introduced a Needle Stabilizer.

Furthermore, to elevate this machine beyond its already high standards, we've introduced the Antigravity system. This system integrates magnets countering cartridge membrane resistance, delivering crisper hits and enhanced pigment injection.

For a deeper understanding of the mechanical and electronic innovations in Avenger 3 Pro, visit our page at https://avenger3pro.vladblad.com/ or drop us a message!